Y-HUB

New Icon FlashingTOTAL CONNECTIVITY TO YOUR YSI® 6 SERIES SONDES IN THE FIELD  

Available for purchase from the USGS HIF

HIF stock number: 6104240 

The Y-HUB is a smart HUB that allows you to easily, flawlessly, and simultaneously interface the following:

SDI-12 data logger

YSI® 6 Series sonde

YSI® 650 MDS® Display or HydroTech NX10 via cable or bluetooth

Y-HUB MAIN


Who said you can't have bluetooth with your YSI® 6 series sondes?

Now the Y-HUB provides you with bluetooth connectivity to all YSI® 6 series units in the field without interruption of your SDI-12 data.


Who said the YSI® 650 MDS® can’t have bluetooth?

The Y-HUB comes with the 650BT module that can attach to any existing 650 MDS® display and provides bluetooth connectivity to all YSI® 6 series sondes via the Y-HUB bluetooth.


No more cleaning Zeros from the data:

Once on site, you can access the field sonde data via the available port on the Y-HUB or via bluetooth without any SDI-12 interruption or disconnection.


No more guessing during troubleshooting:

The Y-HUB LEDs allow the end user to determine the source of any power failure.

The Y-HUB includes power management circuitry that allows auto switching power, regulated power, and current spike protection for sonde and internal Y-HUB circuitry. 


Specs: 

Size: 150.6 mm x 127 mm x 63.5 mm. Total with connectors: 184 mm x 140 mm x 63.5 mm.

(5.93” x 5” x 2.5” inches. Total with connectors: 7.24” x 5.51” x 2.5”)

Weight: 0.55 kg (1.2 lbs)

Temperature range: -20 to 60 ºC (-4 to 140 ºF)

Bluetooth range: 10 m (32.8 F)

IP rating: IP67 (Optional IP68 design available)

Current consumption: 120 mA


LEDs Light Indicator Chart:

Y-HUB TABLE


Common questions and answers:

Q: Can I use the 650BT module with any 650 MDS® display?

A; Yes. No need for hardware or software updates. Just connect the 650BT module to the 650 MDS®.


Q: Does the 650BT module require a battery?

A: No. The 650BT module gets power from the 650 MDS® display. Just make sure the “Power to sonde” option is enabled.


Q: Do I have to disconnect the 650BT module from the 650 MDS® display when not in use?

A: No. The 650BT module goes off as soon as you power down the 650 MDS® display.


Q: Can I connect my NX10 to the Y-HUB via a cable and bluetooth at the same time?

A: No, Once the 650 MDS® or NX10 is connected to the Y-HUB display port via a cable, the bluetooth on the Y-HUB is temporarily disabled.


Q. Can I connect the NX10 universal hand held to the Y-HUB via bluetooth and still run another multiprobe on the NX10 at the same time?

A. Yes. The NX10 provides one connection to any multiprobe via RS232 and as many bluetooth devices as you want at the same time.


Q: What happens when the SDI-12 datalogger turns ON while I am connected to the Y-HUB via cable or bluetooth?

A: The Y-HUB will always allow the SDI-12 data to pass through first. During that time the connection to the bluetooth or cable connection are temporarily halted. The bluetooth and the cable connection to the Y-HUB will automatically resume as soon as the SDI-12 data is transmitted to the datalogger. 




       © Hydrotech ZS Consulting 2016