(Download SDI-12 Converter manual)
The SDI-12 converter translates the Modbus protocol used by TriOS sensors into SDI-12 and thus serves as an interface between the sensors and the SDI-12 interface of the peripherals.
The SDI-12 converter translates the Modbus protocol used by TriOS sensors into SDI-12 and thus serves as an interface between the sensors and the SDI-12 interface of the peripherals. Due to its low standby power (< 20 mW) it is perfectly suited for operation with a battery as power sup- ply. Four status LEDs inform the user continuously about the current operation mode and power sup- ply. Both measurements with G2 sensors and wiper cleaning cycles can be controlled via the converter. The implemented Ethernet interface allows data export and sensor configuration via the web interface.
With three manual buttons Sensor Scan, Wiper Cleaning and Service Mode can be activated. The position of the rotary encoder determines the sensor address via which the sensor is addressed.
Power supply: 12 to 24 Volts
Power consumption: < 20 mW
Connecters: RJ45
IP rating: IP30 NEMA1
Dimensions: 4.7”x3.2”x1.8”
Warranty: 2 years
Recommended wiring for the SDI Converter:
