Aqua TROLL Non-Vented RuggedCable
Titanium Twist-Lock cable for absolute-pressure Aqua TROLL deployments
Aqua TROLL Non-Vented RuggedCable
In-Situ's non-vented RuggedCable delivers real-time communication and power for non-vented (absolute pressure) Aqua TROLL and Level TROLL instruments. Titanium Twist-Lock connectors and a Kevlar-reinforced jacket hold up to years of field deployment, custom-built to the length your site needs.
- Non-vented (absolute) cable — use with non-vented Aqua TROLL and Level TROLL instruments
- IP68 titanium Twist-Lock connectors for corrosion-free, quick-connect field service
- 6-wire design carries Modbus, SDI-12, or 1×4-20mA
- Kevlar reinforcement resists stretch and drift, rated to hold 127 kg (280 lbs)
- Thermoplastic polyurethane (TPU) jacket with metal shielding against electrical interference
- Custom lengths up to 1,219 m (4,000 ft)
- Female Twist-Lock termination available on one or both ends; stripped-and-tinned flying-lead termination available for direct wiring to a logger, controller, or telemetry system
| Spec | Value |
|---|---|
| Type | Non-vented (absolute pressure) RuggedCable |
| Connector | IP68 titanium Twist-Lock |
| Jacket | Thermoplastic polyurethane (TPU), Kevlar reinforced |
| Conductors | 6 conductors, 24 AWG, polypropylene insulation |
| Signal / Power | Modbus RS-485, SDI-12, or 1×4-20mA; instrument power |
| Max Recommended Length — SDI-12 | 61 m (200 ft) |
| Max Recommended Length — Modbus / 4-20mA | 1,259 m (4,000 ft) |
| Load Rating | Up to 127 kg (280 lbs) |
| Termination Options | Female Twist-Lock (one or both ends), or stripped-and-tinned flying leads |
| Compatible Instruments | Non-vented Aqua TROLL and Level TROLL sondes, RDO PRO (Twist-Lock), BaroTROLL, TROLL 9500 |
| Reel | Plastic or steel reel available (recommended over 100 ft) |
Need a vented cable instead for gauged water-level measurements? Give us a call — we build both. See our Aqua TROLL lineup for compatible sondes and vented/non-vented configurations.